View MN15G0402_292135.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN15G0202 , MN15G0402
Type ROM (x8-bit) x RAM (x 4-bit) x Package (Conventional Package) Number of Instructions Minimum Instruction Execution Time
MN15G0202 2K 128 SOP020-P-0300D *Lead-free (SOP020-P-0300) 103 0.5 s at 1/4 frequency dividing (at 3.0 V to 5.5 V, 8 MHz) 1.0 s at 1/4 frequency dividing (at 2.4 V to 5.5 V, 4 MHz) 2.0 s at 1/8 frequency dividing (at 2.0 V to 5.5 V, 4 MHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.3 V. * RESET * IRQ1 * IRQ2 * IRQ3 Timer counter 2 : 8-bit x 1 (pulse output, PWM output) Clock source ********************* 1/2, 1/8, 1/32, 1/128 of system clock; 1/1, 1/4, 1/16, 1/64 of OSC oscillation clock Timer counter 3 : 8-bit x 1 (pulse output, high-functional PWM output) Clock source ********************* 1/2 of system clock; 1/1, 1/26, 1/214 of OSC oscillation clock Timer counter 2 can be cascade-connected. Watchdog timer MN15G0402 4K 128
Interrupts Timer Counter
I/O Pins
I/O
15
* Common use : 11 * Specified pull-up resistor available : 7 (software programmable) * Specified output architecture available : Nch open drain / push-pull : 11 (software programmable) * 4-ch. LED direct drive available (15 mA / 1.0 V)
A/D Inputs Zero-Cross Input Special Ports Notes Electrical Characteristics
Supply current
10-bit x 4-ch. (with S/H) 1 Buzzer output (1 kHz, 2 kHz, 4 kHz : fosc = at 4 MHz) Auto-Reset circuit selectable (none, circuit 1, circuit 2) (mask option)
Limit Parameter Symbol IDD1 Condition min fosc = 8 MHz (1/8 dividing) fosc = 4 MHz (1/8 dividing) fosc = 4 MHz (1/8 dividing) ACZ = 1/2 VDD, Ta = 25C ACZ = 1/2 VDD, Ta = -40C to +85C Ta = 25C Ta = -40C to +85C 4.0 typ 1.5 1.2 0.3 3.0 max 3.0 2.5 0.6 10.0 20.0 1.0 5.0 8.0 mA mA mA A A A A A Unit
Operating supply current
IDD2
Supply current at HALT
IDD3 IDD4
Supply current at SOTP
IDD5 IDD6 IDD7
Auto reset current consumption
IDD8
(Ta = -40C to +85C, VDD = 5.0 V, VSS = 0 V)
1
MAC00002CEM
MN15G0202 , MN15G0402
Pin Assignment
VDD OSC1 OSC2 VSS P00 P01 P02 P03 PWMO0 / P10 PWMO1 / P11 1 2 3 4 5 6 7 8 9 10
SOP020-P-0300D
MN15G0202 MN15G0402
(
20 19 18 17 16 15 14 13 12 11
*Lead-free
) : Conventional Package
P32 / TCO / BZ / key2 P31 / NIRQ / ACZ / key1 P30 / NSYNC / key0 NRST P23 / AD3 P22 / AD2 P21 / AD1 P20 / AD0 P13 / PWMO3 P12 / PWMO2
(SOP020-P-0300)
Support Tool
In-circuit Emulator EPROM Built-in Type
Note) * Because of a special writing system, only a particular writer model manufactured by Data I/O is applicable. * The mask option applies only to no auto reset circuit. (No other options are set.) PX-ICE1500 + PX-PRB15G0202 / 0402-SOP020-P-0300 Type ROM (x 8-bit) RAM (x 4-bit) Minimum instruction execution time MN15GP0402 [ES (Engineering Sample) available] 4K 128 0.5 s at 1/4 frequency dividing (at 3.0 V to 5.5 V, 8 MHz) 1.0 s at 1/4 frequency dividing (at 2.4 V to 5.5 V, 4 MHz) 2.0 s at 1/8 frequency dividing (at 2.3 V to 5.5 V, 4 MHz) Package (Conventional Package) SOP020-P-0300D *Lead-free (SOP020-P-0300)
MAC00002CEM
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL

▲Up To Search▲

Price & Availability of MN15G0402

	To Download MN15G0402 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .